扬州地区肝硬化食管静脉曲张初次出血80例患者诊治分析

目的探讨扬州地区肝硬化食管静脉曲张初次出血患者诊治特点。方法回顾性分析2010年1月-2013年12月苏北人民医院消化内科收治的80例肝硬化食管静脉曲张初次出血患者病例资料。计数资料用率或构成比表示,率的比较采用χ2检验。结果由乙型肝炎导致肝硬化所引起的食管静脉曲张破裂出血所占比例最大;三腔二囊管临床运用可最大限度地挽救患者生命,为后期治疗提供时间;基础治疗包括止血、输血、抑酸、补液等,后期以硬化剂、套扎、硬化剂+套扎、手术、经颈静脉肝内门体分流术(TIPS)为主,但套扎运用最为广泛;患者出血初期各项指标变化有利于指导临床治疗,对患者预后具有良好的评估作用。结论扬州地区肝硬化引起的食管静脉曲张破裂出血病因呈现复杂交叉性,治疗方法仍需进一步完善,以达到个体化治疗水平;及时正确的救治,对提高临床疗效、降低病死率有重要意义;早期的健康体检,对疾病诊治起关键性的作用。     

Clinical outcomes of bypass-first versus endovascular-first strategy in patients with chronic limb-threatening ischemia due to infrageniculate arterial disease

Background

Chronic limb-threatening ischemia (CLTI), defined as ischemic rest pain or tissue loss secondary to arterial insufficiency, is caused by multilevel arterial disease with frequent, severe infrageniculate disease. The rise in CLTI is in part the result of increasing worldwide prevalence of diabetes, renal insufficiency, and advanced aging of the population. The aim of this study was to compare a bypass-first with an endovascular-first revascularization strategy in patients with CLTI due to infrageniculate arterial disease.

Biomarkers of cardiometabolic health are associated with body composition characteristics but not physical activity in persons with spinal cord injury

Objective: To examine (i) the associations between physical activity dimensions, cardiorespiratory fitness and body composition and, (ii) the associations between physical activity dimensions, cardiorespiratory fitness, body composition and biomarkers of cardiometabolic health in persons with spinal cord injury (SCI).

Methods: A cross-sectional prospective cohort study with 7-day follow-up was conducted. Body composition, cardiorespiratory fitness and biomarkers of cardiometabolic health were measured in thirty-three participants with SCI (> 1 year post injury). Physical activity dimensions were objectively assessed over 7-days.

Results: Activity energy expenditure (r =.43), physical activity level (r =.39), and moderate-to-vigorous physical activity (MVPA) (r =.48) were significantly (P < 0.001) associated with absolute (L/min) peak oxygen uptake (?O₂ peak). ?O₂ peak was significantly higher in persons performing ≥150 MVPA minutes/week compared to <40 minutes/week (P?=?0.003). Individual physical activity dimensions were not significantly associated with biomarkers of cardiometabolic health. However, body composition characteristics (BMI, waist and hip circumference) showed significant (P < 0.04), moderate (r >.30) associations with parameters of metabolic regulation, lipid profiles and inflammatory biomarkers. Relative ?O₂ peak (ml/kg/min) was moderately associated with only insulin sensitivity (r?=?0.37, P?=?0.03).

Conclusions: Physical activity dimensions are associated with cardiorespiratory fitness; however, stronger and more consistent associations suggest that poor cardiometabolic health is associated with higher body fat content. Given these findings, the regulation of energy balance should be an important consideration for researchers and clinicians looking to improve cardiometabolic health in persons with SCI.     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

胃食管反流病与功能磁共振技术

随着对胃食管反流病研究的深入,大脑和食管感觉及胃排空的相互作用越来越受到重视,功能磁共振成像技术,有助于进一步了解胃食管反流病的发病机制。     

Stones, bones, and heredity

Genetic disorders of mineral metabolism cause urolithiasis, renal disease, and osteodystrophy. Most are rare, such that the full spectrum of clinical expression is difficult to appreciate. Diagnosis is further complicated by overlap of clinical features. Dent's disease and primary hyperoxaluria, inherited causes of calcium urolithiasis, are both associated with nephrocalcinosis and urolithiasis in early childhood and renal failure that can occur at any age but is seen more often in adulthood. Bone disease is an inconsistent feature of each. Dent's disease is caused by mutations of the CLCN-5 gene with impaired kidney-specific CLC-5 chloride channel expression in the proximal tubule, thick ascending limb of Henle, and the collecting ducts. Resulting hypercalciuria and proximal tubule dysfunction, including phosphate wasting, are primarily responsible for the clinical manifestations. Low-molecular-weight proteinuria is characteristic. Definitive diagnosis is made by DNA mutation analysis. Primary hyperoxaluria, type I, is due to mutations of the AGXT gene leading to deficient hepatic alanine–glyoxylate aminotransferase activity. Marked overproduction of oxalate by hepatic cells results in the hyperoxaluria responsible for clinical features. Definitive diagnosis is by liver biopsy with measurement of enzyme activity, with DNA mutation analysis used increasingly as mutations and their frequency are defined.

Conclusion

These disorders of calcium urolithiasis illustrate the value of molecular medicine for diagnosis and the promise it provides for innovative and more effective future treatments.     

Influence of SNPs in cytokine-related genes on the severity of food allergy and atopic eczema in children

Although many single nucleotide polymorphism (SNP) studies have reported an association of atopy, allergic diseases and total serum immunoglobulin E (IgE) levels, almost all of these studies sought risk factors for the onset of these allergic diseases. Furthermore, many studies have analyzed a single gene and hardly any have analyzed environmental factors. In these analyses, the results could be masked and the effects of other genes and environmental factors may be decreased. Here, we described the correlation between four genes [interleukin (IL)-4 (C-590T), IL-4 receptor (A1652G), FCER1B (G6842A) and STAT6 (G2964A)] in connection with IgE production; the role of IL-10 (C-627A) as a regulatory cytokine of allergy; and the severity of food allergy (FA) and atopic eczema (AE) in 220 Japanese allergic children. In addition to these SNPs, environmental factors, i.e., patient's attitude, indoor environment, and so on, were also investigated in this study. Our study was retrospective, and the correlation was analyzed by our defined clinical scores divided into three terms: worst symptoms, recent symptoms and general amelioration at the most recent examination during the disease course. Our results indicated that IL-10 AA, the genotype with lower IL-10 production, is associated with higher IgE levels in the serum (p < 0.0001, estimate; 0.912). Marginal liver abnormalities were observed in the subject group with both FA and AE (p < 0.1191, estimate; 0.1490). Our defined clinical scores enabled evaluation of various aspects of disease severity. Based on the scores, while no single SNP selected in this study determined severity, the combination of the SNP with laboratory data and environmental factors appeared to determine severity.     

A facile synthesis of [14C]pyrithiobac‐sodium

Condensation of thiourea 1 with diethyl malonate 2 in the presence of sodium methoxide furnished 4,6‐dihydroxy‐2‐mercaptopyrimidine 3 . Compound 3 on methylation with diazomethane followed by oxidation with H₅IO₆/CrO₃ in ethyl acetate gave 4,6‐dimethoxy‐2‐methylsulphonylpyrimidine 5 . Compound 5 on condensation with 2‐mercapto‐6‐chlorobenzoic acid in the presence of a phase transfer catalyst, tetrabutylammonium bromide and sodium carbonate gave the title compound – pyrithiobac‐sodium 6 with an overall yield of > 35% starting from thiourea. Following the above standardized procedure, using [¹⁴C]‐thiourea in lieu of thiourea, ¹⁴C labelled product 6 , was synthesized with an overall radiochemical yield > 30% (with respect to [¹⁴C]‐thiourea) for further evaluations of environmental fate of 6 , in soils and plants. Copyright © 2006 John Wiley & Sons, Ltd.     

CORRELATIONS BETWEEN VIDEO CAPSULE ENDOSCOPIC FINDINGS AND CLINICAL ACTIVITY IN CROHN’S DISEASE

Background and Aims: Video capsule endoscopy (VCE) has become increasingly important as a simple method for observing the entire small intestine. The indications for VCE are obscure gastrointestinal bleeding and investigation of Crohn’s disease (CD). However, the correlation between endoscopic findings obtained by VCE and clinical findings in known cases of CD is not clear, and we therefore investigated this in the present study. Patients and methods: In 30 patients with known CD (Crohn’s disease activity index [CDAI] 0–420; median = 158.3), double contrast enteroclysis (ENT) was performed 1–3 weeks prior to VCE. The relationship between the VCE findings and hematological analysis/CDAI was examined. Results: In 17 of 30 patients, the entire small intestine could be investigated by VCE, whereas in the remaining 13 patients the terminal ileum could not be investigated. The following exhibited positive correlations: total lesions and CDAI (correlation coefficient values: r_s = 0.661, adjusted P < 0.0061), ulcers and C‐reactive protein (CRP) (r_s = 0.607, adjusted P < 0.0061), total lesions and CRP (r_s = 0.604, adjusted P < 0.0061). Conclusions: Analysis with VCE suggests that CDAI and CRP indicate the activity of intestinal lesions in patients with known CD, and that CRP, in particular, is associated with the activity of ulcerative lesions of the intestine. This may contribute to revised guidelines for VCE in the future.